Install your Gripple in just 5 simple steps:
	Step 1 Put the end of the wire through, or around, the anchorage point.
	Step 2 Pass the end through the eye of the case and firmly pull.
	Step 3 Now push the end through a Grip canal and pull the required amount of wire.
	Step 4 Put the end through, or around, the portion of the object that will be used to hold it.
	Step 5 Take the Grip wire and push it through the second canal. Pull the cable until you have reached the required length.

The Gripple Hang-Fast system is the ideal solution for hanging mechanical or electric installations. This product, which was introduced into the market in January 1998, is nowadays the fastest method to suspend mechanical and electrical services. Not only does it have a fast installation, but it turns out to be extremely strong and at the same time easy to transport.

Gripple Hang-Fast requires only a sixth part of the time that it would take to install sets screws. The Gripple Hang- Fast is ideal for hanging:

Electrical Services

• Lights
• Cable Trays
• Pipes

Heating, ventilation, A/C ducting Services

• Ventilation Units
• Spiral ducts
• Oval ducts
• Rectangular ducts

Mechanicals

• Diverse equipment
• Pipelines for water, gas, compressed air, etc.
• Diverse Panels
  

Main benefits for the user

• It can be installed either vertically or in an angle according to the suspended object.
• It has been shown that the installation timing is reduced up to a sixth of the time.
• Gripple Hang-Fast is light and easy to transport, and combines these qualities with the strength inherent to the tension wires.
• Its lightness represents an increase in safety, regarding simplicity of transportation as well as a decreased accident risk in aerial situations that may be caused by falling objects. For example, a Gripple Hang-Fast of 200 x 1 m (size #2) only weights 19, 84 pounds (9 kilograms) compared to the 656, 17 feet (200 meters) threaded rod which weights 308, 65 pounds (140 kilograms), saving almost 94% weight-wise.